How to start car when starter is bad ? 3 Simple Steps

Last Updated on January 28, 2023 by Showroomex Desk

Home » How to start car when starter is bad ? 3 Simple Steps

How to start car when starter is bad ?

When the starter on your car is wrong, the engine will not turn over when you turn the key in the ignition. It can make it tough to start your vehicle and get it running. However, you can try a few other things to get your car started when the starter is bad.

How to start the car when the starter is bad? Follow following steps

1. you can try jump-starting the car.

It involves using another vehicle to provide power to the battery in your car. To do this, you will need to connect the positive (red) jump lead to the positive terminal on the battery in your vehicle and the negative (black) jump rise to the negative terminal on the battery in the other vehicle. Make sure the other car is running before attempting to start your car. After the cables are connected, turn on the engine from another vehicle and wait for about 2-3 minutes. After that, try starting your vehicle.

2. Use a push start

Another option is to use a push start. This method requires the help of another person, and it works by pushing the car to get it moving and then quickly jumping in the car and turning the key to start the engine. If not done correctly, this procedure, which works best on a level surface, can be dangerous. Before attempting to push start the automobile, be sure it is in neutral and that the parking brake is engaged.

3. You can try bypassing the starter to determine whether the issue is the cause of the above steps does not work.

Locate the starting relay to accomplish this placed under the hood close to the battery. The relay is a small electrical component that sends power to the starter. Once you find it, disconnect the relay and use a screwdriver to bridge the two terminals on the relay. If the engine starts, then the starter is most likely the problem.

If none of the above methods work, it may be necessary to tow the car to a mechanic for repairs. A wrong starter will need to be changed to get the car running again.

It’s also a good idea to regularly check the battery and starter of your car to ensure they are in good condition. Also, if you notice any signs of a failing starter, like a clicking noise when you turn the key or an engine that won’t crank, it’s best to take the car to a mechanic for an inspection.

In conclusion, when the starter is wrong, you can try jump-starting the car, using a push start method, bypassing the starter, or towing the vehicle to a mechanic for fixing. To get your automobile working again, you need a trained mechanic that diagnoses the issue and replaces the defective starter. Regularly checking the battery and starter will prevent the starter from failing and causing inconvenience.

Rate this post

Mansoor Ali

Mansoor Ali, a Feature Writer, embarked on his journey five years ago with showroomex.com, fueled by his enthusiasm for cars. Starting as an eager journalist, he quickly became a seasoned professional, expanding his expertise to cover both bikes and cars. (Full Bio)