Windshield wiper blades are flexible rubber-like strips attached to the wiper arms of a vehicle. These are used to clean the view from the windshield. Any kind of debris, dust, or raindrops can be removed with the help of windshield wiper blades. Each car has two blades, one for the passenger and the other for the driver.
It is essential to keep these windshield wiper blades clean because they tend to get dirty easily. Clear visibility is necessary for a safe driving experience. And if it is raining outside or there is a storm outside, driving in such circumstances becomes a little difficult. Windshield wiper blades help a lot if they are not working well; replacing them is an easy, budget-friendly thing. You can also do it at home and use it confidently in any situation. In this article, we will let you know how you can replace your windshield wiper blades.
Things you need:
New wiper blades:
If you want to replace your windshield wiper blades, it’s very obvious that you need to buy the right wiper blades first. You will get to know the size and type of your wiper blade by flipping through your car’s manual. Some stores even offer to connect them for free if you’re feeling unsure.
Because there’s a high need to be the exact size and type for your car’s model. Some cars use different lengths for the driver’s and passenger’s side, and some have special connectors. So buy new wipers for your car that fit exactly the model of your car.
A clean cloth:
A clean cloth or microfiber cloth is a great choice to clean any dirt or smudges after you’re done fitting your new wiper blades. The cloth must be clean and soft because a harsh and untidy cloth will make your car even dirtier and greasier. Another important tip is to avoid anything abrasive, like paper towels, that might scratch the glass.
Windshield washer fluid:
This is a liquid thing that works like a spray to remove any dirt. If your car’s reservoir is low, it’s a good time to refill it while you are at it. You can easily get it from any gas station or an auto store. It’s a very optional thing whether you want to use it or not. It’s totally up to you, and you can use it according to your preferences and requirements. Check your manual to see what kind your car you have because most automobiles take standard washer fluid.
No tools required:
In this process of changing windshield wiper blades, no specific tools are required. Most wiper blades are designed to snap on and off by hand. You don’t need screwdrivers or anything like that to fix it; you can do this all with your hands. It’s very rare that your car has an unusual wiper system; the new blades and packaging will usually be mentioned if tools are required.
A step-by-step guide to replacing your windshield wiper blades:
Buy the right wiper blades:
If you want to replace your windshield wiper blades, it’s very obvious that you need to buy the right wiper blades first. You will get to know the size and type of your wiper blade by flipping through your car’s manual. Some stores even offer to connect them for free if you’re feeling unsure.
Lift the wiper arm:
Head out to your car and make sure it’s turned off safely. Start with one wiper blade. Gently lift the wiper arm away from the windshield. It’s like lifting an arm, and it should step up on its own. If it feels stuck, don’t force it. Just wiggle it gently until it loosens up and stays in place.
Remove the old wiper and attach the new wiper blade:
Look at the point where the wiper blade attaches to the arm. You will see a small clip or button. Press the tab or push the button and pull the blade down. It comes off very gently and easily. If it’s persistent, jiggle it a little while holding the clip or button; don’t pull too hard, just be patient, and it’ll pop off.
Grab your new wiper blade and line it up with the wiper arm. Slide or snap it into place _ most blades will make a little click when they’re locked in. Give it a gentle tug to check if it fits properly or not. If it feels a little loose or wobbly, there’s a need to try it again. Now repeat the same thing for the other side of the blade.
Test your new wipers:
Start your car and turn on the wipers to make sure they are working well. Spray some washer fluid and then check how it moves. The new wiper blades should glide smoothly. If it’s not working well, double-check the entire process to see if they’re attached properly or not, and if the size of the blade is perfect or not. As we discussed above, take a clean, smooth towel or a piece of cloth to clean it properly.
The new wiper blades will give a crystal clear view and a safe driving experience. You can confidently use it when it’s raining or there’s a storm outside. You can use it without any worries.